Bearing 347KV4651

Cap bolt recommended tightening torque:203.4 N·m; R2:33.337 mm; Cap bolt:4 x 3/4-10 UNC; PG:1/4 NPT; P90°:136 kN; ba:72.231 mm; J1:95.25 mm; Cap bolt, SAE grade:5; P60°:226 kN; Bearing:22326 CC/W33;

E:50 mm; Limiting speed:10000 r/min; Db:45.6 mm; r1,2 min.:0.3 mm; da:49.2 mm; Da:50.5 mm; Fatigue load limit Pu:5.6 kN; Mass bearing:0.083 kg; Basic dynamic load rating C:21.6 kN; Fw:45 mm;

r3,4 min.:0.6 mm; Static moment stiffness:290 N·m/mrad; rb max.:0.6 mm; b:4.2 mm; Mass bearing:0.41 kg; ra max.:0.3 mm; H:28 mm; d:30 mm; Preload:2250 N; K:3 mm;

B:20 mm; d:22 mm; r, r1,2 min.:0.3 mm; F:26 mm; Mass inner ring:0.023 kg;

Da:250 mm; H2:60.325 mm; P60°:301 kN; P120°:116 kN; H:298.45 mm; Taconite seal:TER 121; R2:38.1 mm; Cap bolt, SAE grade:8; Initial grease fill:481.95 g; L:511.175 mm;

B:20 mm; d:22 mm; r, r1,2 min.:0.3 mm; F:26 mm; Mass inner ring:0.023 kg;

l7 min.:48 mm; G:M 45x3; Basic dynamic load rating C:127 kN; α:7 °; w:55 mm; Mass rod end:3.2 kg; C1 max.:28 mm; dk:60 mm; B:32 mm; Basic static load rating C0:224 kN;

D:110.0000 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:5000 rpm; Oil Speed Rating n2:6700 rpm; d:60.000 mm; Basic Dynamic Radial Load Rating C:58500 N; Basic Static Radial Load Rating Co:45500 N; B:22.00 mm;

B:20 mm; d:22 mm; r, r1,2 min.:0.3 mm; F:26 mm; Mass inner ring:0.023 kg;

Da:250 mm; H2:60.325 mm; P60°:301 kN; P120°:116 kN; H:298.45 mm; Taconite seal:TER 121; R2:38.1 mm; Cap bolt, SAE grade:8; Initial grease fill:481.95 g; L:511.175 mm;

B:20 mm; d:22 mm; r, r1,2 min.:0.3 mm; F:26 mm; Mass inner ring:0.023 kg;

D:200.0000 mm; Basic Dynamic Radial Load Rating C:291000 N; d:95.000 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:325000 N; Fillet Radius ra:2.50 mm; B:90.00 mm; Oil Speed Rating n2:3200 rpm; Grease Speed Rating n1:2500 rpm;

d1 ≈:46.7 mm; r1,2 min.:1.5 mm; Calculation factor e:0.46; Calculation factor kr:0.05; Calculation factor Y0:1.4; D1 ≈:67 mm; da min.:44 mm; Calculation factor Y2:2.1; da max.:46 mm; Basic static load rating C0:11.2 kN;

Coefficient of friction µ min.:0.02; L:500 mm; H:1.5 mm; Specific dynamic load factor K:120 N/mm²; Permissible sliding velocity v min.:0 m/s; B:100 mm; Specific static load factor K0:250 N/mm²; Coefficient of friction µ max.:0.2; Permissible sliding velocity v max.:2.5 m/s; Mass strip:0.47 kg;